The Seville has sleek understated lines with a discreet shaver socket situated on the left hand side. This fitting is suitable for zone 3 of the bathroom and is IP20 rated.

Click to view our full range of bathroom mirror lights

The Anja Shaver Light is a multi-tasking fitting with the added advantage of a shaver point which is discreetly built into the left side of the light fitting behind a flap cover.

The Anja is produced in polished chrome with a frosted glass light cover and is suitable for use in zone 3 of the bathroom and is IP20 rated.

Click to take a look at the rest of our shaver lights we have on offer.

Uses a 24w low energy 2G11 lamp (not supplied)
Dimensions: Height 73cm Width 600cm Depth 80mm
Pull cord switch on right hand side
Suitable for use in zones 2 & 3 of the bathroom
Not dimmable
IP rating 44

Click to view full details of the Ixtra Shaver Light

In regards to all bathroom light fittings, shaver lights are allocated an IP rating. Electrical laws divide the bathroom into a series of zones and these zones correlate to the IP ratings. It is necessary, hence, that go ahead and acquire your shaver light, you know where you will fit it. The simple truth is, it is likely it goes above the mirror over the sink.

In simple lingo, the IP rating lets you know how much protection a light fitting features from water entering into it, this includes droplets of water, vapour and condensation. As previously pointed out, the specific IP rating needed is dependent upon just where in the bathroom the light will be positioned. The general rule is for every bathroom lighting you need a minimum IP rating of 44. Shower and in bath lighting will require a greater rating as this kind of fitting must actually be immersible.

Shaver lighting is generally made from glass and or plastic and also, for safety reasons are worked using a pull cord. Currently, there are both single and dual voltage products, however, the fact remains that, for home use in the United Kingdom single voltage is all you need. Except if, however, you actually entertain continental family and friends on a frequent basis! If you obtain a dual voltage option you swap from one voltage to another by means of a very simple rocker switch.

For anybody who is a style freak, well, shaver lights do not really offer much in terms of funkiness as these fittings are generally small scale and of lower profile, however, that isn’t truly going to be a problem  and chrome fits any decorative style. When it comes to simply practical terms, I suggest you should think about a product which includes frosted glass, this means your own reflection will certainly be much less of a shock to the system each day !

Let us never overlook that despite the fact that this kind of light is designated a ‘shaver light’ they are made use of equally as well for applying makeup – and in addition for recharging your toothbrush.

The truth is that for daily aesthetic tasks like shaving or making up that ceiling light is not actually up to much; the lighting is just not focused sufficiently and yes it tends to create shadows. The result is you will be going to walk out of the house with overlooked patches of stubble or blotches of mascara below your eye. In that respect there must be a much better method!

The cold harsh fact is that Vanity lighting is really the only light you should have in the bathroom. Needless to say, you could very well buy ambiance lighting too, but, what you want to try and do is go into the bathroom looking just like you and appear looking lovely. You won’t do that without the need for the best mix of lights around the mirror, that’s in general taken to be a light above the mirror and one on each side.

So, should you make the light above the mirror a shaver light – you’ve got somewhere to connect the razor for free!

In regards to all bathroom light fittings, shaver lights are allocated an IP rating. Electrical laws divide the bathroom into a series of zones and these zones correlate to the IP ratings. It is necessary, hence, that go ahead and acquire your shaver light, you know where you will fit it. The simple truth is, it is likely it goes above the mirror over the sink.

In simple lingo, the IP rating lets you know how much protection a light fitting features from water entering into it, this includes droplets of water, vapour and condensation. As previously pointed out, the specific IP rating needed is dependent upon just where in the bathroom the light will be positioned. The general rule is for every bathroom lighting you need a minimum IP rating of 44. Shower and in bath lighting will require a greater rating as this kind of fitting must actually be immersible.

Shaver lighting is generally made from glass and or plastic and also, for safety reasons are worked using a pull cord. Currently, there are both single and dual voltage products, however, the fact remains that, for home use in the United Kingdom single voltage is all you need. Except if, however, you actually entertain continental family and friends on a frequent basis! If you obtain a dual voltage option you swap from one voltage to another by means of a very simple rocker switch.

For anybody who is a style freak, well, shaver lights do not really offer much in terms of funkiness as these fittings are generally small scale and of lower profile, however, that isn’t truly going to be a problem  and chrome fits any decorative style. When it comes to simply practical terms, I suggest you should think about a product which includes frosted glass, this means your own reflection will certainly be much less of a shock to the system each day !

Let us never overlook that despite the fact that this kind of light is designated a ‘shaver light’ they are made use of equally as well for applying makeup – and in addition for recharging your toothbrush.

The truth is that for daily aesthetic tasks like shaving or making up that ceiling light is not actually up to much; the lighting is just not focused sufficiently and yes it tends to create shadows. The result is you will be going to walk out of the house with overlooked patches of stubble or blotches of mascara below your eye. In that respect there must be a much better method!

The cold harsh fact is that Vanity lighting is really the only light you should have in the bathroom. Needless to say, you could very well buy ambiance lighting too, but, what you want to try and do is go into the bathroom looking just like you and appear looking lovely. You won’t do that without the need for the best mix of lights around the mirror, that’s in general taken to be a light above the mirror and one on each side.

So, should you make the light above the mirror a shaver light – you’ve got somewhere to connect the razor for free!

Most houses built in the last 3 decades have only the normal fundamental ceiling light which can be good and it will serve a function.  There is, however, a tremendous assortment of additional bathroom light fittings you can buy that can design a person’s little boudoir,  I can endeavor to cover the various bathroom lighting on the market in this article.

The bathroom ceiling light is widely considered the simplist and quickest of design changes you possibly can make in your bathroom lighting layout. Manufacturers have experienced in recent years how the bathroom lighting marketplace had been sometimes lacking in style and now have decided they would fill the gap with a large assortment of fabulous contemporary and tradtional bathroom ceiling light designs.

Precisely what else would you accomplish? Very well let’s take a look straight away at another alternative and exactly how they’re going to integrate into the bathroom lighting design.

If you are looking to go that tiny bit further with your bathroom ceiling well maybe bathroom downlights could well be a choice. Not only do they seem superbly fashionable they will even provide you with great lighting in all aspects of the bathroom, then with regards to ambient mood lighting you can actually fit a dimmer switch to tone down the light when relaxing. I must insist that if you’re fitting a dimmer switch this must remain on the outside of the bathroom to abide by lighting regualtions.

Bathroom wall lights can be used to produce that wonderful background light necessary to relax in the bathroom, you will discover lots of different models that you can purchase right now that will compliment just about all applications, word of warning though make certain you look for bathroom wall lights which meet the existing electrical regulations – standard wall lights are not suitable for bathroom lighting applications.

Bathroom mirrors exist in virtually all bathrooms plus its one place which really does want an adequate amount of lighting, basic bathroom lighting can often initiate dark areas around the mirror which in turn isn’t good when making yourself look pretty. Ways for bathroom mirror lighting includes lights on the wall around the mirror, shaver lights that may additionally supply you with somewhere to charge a razor or toothbrush and mirror cabinets with incorporated lighting. The thing that can typically keep you back is the current electrical wiring situation and how much cash you have available to invest.

Every aspect I have talked about above on bathroom lighting will need to conform to current electrical regulations. When shopping for new bathroom lighting you need to be certain it is ideal for zones 1,2 and 3 inside the bathroom, this will make sure that family and friends escape any danger of electrocution from these frequently moist surroundings.

View our full bathroom lighting range

With regards to all bathroom light fittings, shaver lighting is issued an IP rating. Electrical laws break down the bathroom into a series of zones and these zones correlate to the IP ratings. It is essential, therefore, that before you go to purchase the shaver light, you know exactly where you may want to fit it. The fact remains, needless to say, it is likely that it goes over the vanity mirror over the sink.

In quite simple terms, the IP rating lets you know how much proper protection a light fitting provides against water getting in it – this includes droplets of water, steam and condensation. As already outlined, the specific IP rating required is dependent upon where exactly within the bathroom the light is going to be placed. The general rule of thumb is always that for your bathroom lighting you will need a minimum IP rating of 44. Shower and in-bath lighting will require a greater rating, as this kind of fitting must really be immersible.

Shaver lighting is typically made out of glass and/or plastic, plus, for safety factors are worked using a pull cord. You will discover either single and dual voltage types however the fact is that, for home use in the uk, single voltage is all you want. Except if, of course, you actually entertain continental visitors on a frequent basis! Should you buy a dual voltage type, you change from one voltage to another through a basic rocker switch.

In case you are a design freak, well, shaver lights do not actually provide a great deal in terms of funkiness! Mainly because fittings are usually not so big and also of lower profile, although, that is not actually likely to be a problem – and chrome complements any decorative style. In practical terms you should think about a type which includes frosted glass for the reason that is will be less of an impact to the system each day.

Let us not forget either, that despite the fact this type of light is designated a ‘shaver light’ they could be made use of equally at the same time for applying makeup – plus for recharging your toothbrush.

It’s a fact that, for everyday aesthetic tasks like shaving or making up, that a ceiling light just isn’t up to the job; the lighting is not really focused sufficiently, and yes, it results in dark areas. The result is you will be just about guaranteed to leave your house with missed sections of stubble or blotches of mascara beneath your eye. Now there has to be a more desirable way!

The cold, harsh the fact is that Vanity lights are the one light you should have in the bathroom. However, you may well select mood lighting too – but what you really want to try and do is go into the bathroom looking like you and appear looking fantastic. You will not want to do that without the need for the correct mixture of lights around the mirror, that’s broadly speaking taken being a light above the mirror and one more on either side.

So, if you should make the light above the mirror a shaver light - you’ve got a place to connect the razor at no cost!

As with all bathroom light fittings, shaver lights are assigned an IP rating.  Electrical regulations divide the bathroom into a series of zones and these zones correlate to the IP ratings.  It is vital, therefore, that before you go to purchase your shaver light, you know exactly where you are going to fit it.  In reality, of course, the likelihood is that it will go above the mirror over the sink.

IP, which stands for Ingress Protection, tells you how much moisture protection an implement has; the higher the IP number the greater the moisture protection. In general terms you are looking for IP44 and above.  Do not buy any bathroom electrical equipment that isn’t IP rated.

If you find yourself wondering whether to choose a single voltage or a dual voltage shaver light, just go for the model that you like the best.  Unless you have frequent or regular foreign visitors to your house you will be fine with the single voltage model.  If you do go for a dual voltage light, changing the voltage is as simple as flicking a switch, so there’s nothing to worry about.

0275 Bathroom Shaver Light £65.58

If you’re a style freak, well, shaver lights don’t really offer much in terms of funkiness!  As these fittings tend to be small and of low profile, though, that’s not really going to be an issue – and chrome goes with any decorative style.  In purely practical terms, you should seriously consider a model that features frosted glass, which means your reflection will less of a shock to the system in the morning.

And, just because it’s called a shaver light doesn’t mean it can’t be used for the application of makeup!  You can use it for recharging your toothbrush too.

If you have nothing more than a ceiling light in your bathroom, you’re missing a trick.  Illumination cast by central pendants or globes not only creates shadows but, by the time it reaches your reflected image it’s also lost most of its strength.  This means you are likely to go out into the world with patchy makeup or an uneven shave.  There is a better way.

Let’s face it, despite the glossy and moody images you see in interior magazines, what really matters in the bathroom is vanity lighting.  The bathroom, after all is the place where miracles happen: you go in looking dreadful and come out looking wonderful.  At least, that’s the theory.  This miraculous transformation can only happen if you have the right lighting set up, which is generally accepted to be a light above the mirror and one lamp each side at round about eye level.   Which is, of course, exactly where you’ll put that new shaver light.

See, a bathroom shaver light – essential in the vanity lighting stakes and somewhere to plug your razor.  Two for the price of one (or three if you count recharging the toothbrush)!

As with all bathroom light fittings, shaver lights are assigned an IP rating.  Electrical regulations divide the bathroom into a series of zones and these zones correlate to the IP ratings.  It is vital, therefore, that before you go to purchase your shaver light, you know exactly where you are going to fit it.  In reality, of course, the likelihood is that it will go above the mirror over the sink.

0275 Shaver Light £65.58 +vat

IP, which stands for Ingress Protection, tells you how much moisture protection an implement has; the higher the IP number the greater the moisture protection. In general terms you are looking for IP44 and above.  Do not buy any bathroom electrical equipment that isn’t IP rated.

Shaver lights are generally made from glass and/or plastic and, for safety reasons, are operated by a pull cord.  You will find both single and dual voltage models but the truth is that, for home use in the UK, single voltage is all you need.  Unless, of course, you entertain continental guests on a frequent basis!  If you do purchase a dual voltage version, you switch from one voltage to another by means of a simple rocker switch.

Where you may find yourself struggling is in the style stakes – after all there is only so much input a designer can have into what, at the end of the day, is simply a strip light with a two pin socket!  Nevertheless, shaver lights are so compact and low-profile that, whatever style your dcor, you’ll find that the majority of models look fine.  For sheer practicality and lack of morning shocks, choose a model that features frosted glass.  Unshaded glass or light through a clear shade is just too much for early morning eyes.

Let’s not forget either, that even though this type of light is designated a ‘shaver light’ they can be used equally as well for applying makeup – and also for recharging your toothbrush.

If you have nothing more than a ceiling light in your bathroom, you’re missing a trick.  Illumination cast by central pendants or globes not only creates shadows but, by the time it reaches your reflected image it’s also lost most of its strength.  This means you are likely to go out into the world with patchy makeup or an uneven shave.  There is a better way.

Vanity lighting is what it’s all about and the truth is vanity lighting is all you need in your bathroom. All that mood lighting is all very well but what you really want is light that not only makes you look good but helps you to look even better.  The accepted key to good mirror lighting is one light above the mirror and one light on either side.  A shaver light can be the first part of that lighting trio.

Now, if you make the light above the mirror a shaver light – you’ve got somewhere to plug in the razor for free!

View our full range of bathroom shaver lights