Selecting a Glorious Lamppost For Your Garden
No matter if your primary focus is being stylish or protecting where you live with your family the garden lamppost does both. Lampposts are an amazingly elegant approach to simplify your patio area, imparting a certain ‘up-market’ feel to your landscaping.
The range of lamppost variations out there is considerable, so no matter what your tastes, whether it is up-to-the-minute or traditional, you can get items to fit your scheme. The same goes for the manufacture material – bronze, copper, aluminium, each of these are available.
Having determined the type of lamppost you want in your garden, you have to look at where exactly to place it! Keep in mind your post can be a focus, so, unless of course you are blessed with acres of land and miles of drive, you’ll probably only have to have one. For beneficial lighting requirements, the ideal place to place your new garden lamppost is at the beginning or end of the drive or walkway, always remembering that the light they cast can create magnificent effects when coupled with decking, pools, gazebos and along with other architectural features.
You will need to dig a hole where you want to plant the post; and we’re not indicating a titchy-tiny hole here. Normally we would recommend a depth of at least 18 inches and 6 inches around the base of the post, normally you sould set you lamppost into concrete for the best fixing. Nowadays modern designs of lampposts come with or have the option of a ‘sub-base’ this is a metal cage that sits in the ground and concrete is poured around it to set the base in place it is then just a simple job of placing the base of you lamppost over the pre aligned holes that protrude from the sub base concreted into the ground. But check before buying if this type of base is supplied with your post.
Only after you have dug deep enough are you able to give some thought to laying the armoured cables. We won’t pull our punches here – we highly recommend that you use the services of a fully experienced and qualified electrician. If you want to lay the wires by yourself it is crucial you consult the local building regulations, which will undoubtedly be very detailed about just how deep the cables have to be laid. And in addition, whether you or your electrician are doing the installation, make sure you buy more than enough cable. We recommend that you give extra length to allow for stripping back at both ends to permit the relevant connections that needs to be made.
For the bulb itself, a GLS low-energy light bulb is worth consideration for it’s decorative looks. The spiral low energy as well as the stick low energy types are obvious in their ugliness! Using the GLS version, makers have used the traditional light bulb as their inspiration and in doing this consequently created one that won’t ruin the looks of what has most likely been a high priced purchase.
Your ultimate decision is whether or not to install a sensor. One can have either a movement (PIR) sensor or maybe a daylight one. By switching on your lamppost when ever you have neglected to do this, a sensor will help to increase your feeling of security.
View our full garden lamppost range
Tags: exterior lighting, Exterior Lights, garden lamp post, Garden lamp posts, garden lamppost, Garden Lampposts, garden lights, Lamp Posts, lamposts, lampposts, outdoor light, outdoor lighting, outdoor lights, Security Garden Lights, security light, victorian lamp posts, victorian lamposts
